Lambretta LI S2 190
 
 
Name: Robert Devlin 

Location: Las Vegas NV (USA). 

Bike: 1961 Ser. 2 Li 190 
  
I built the bike almost totally myself, I did all the paint and polishing and had the chrome sent out. The motor was built at West Coast Lambretta Works and is a Imola that has .5mm taken off the bottom, and the head has also been skimmed and reprofiled. Ts1 intake manifold with a 28mm Mikuni flat slide, GP crank with Yamaha con rod, elec. ign. with lightend fly wheel. I'm useing a pacemaker gearbox with a 17/46. Innicenti disk brake converted to hydrolic( by WCLW) with a Grimeca master cylinder behind the horn cast. Crusing speed is around 65/70 mph with a top speed of 80/85mph.